design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ nhg C eee-99 C 0 5 to 0 8 0 d0.5 0 d0.05 f0.5 sleeve 14 min. 3 min. l = = l 16 : l1.0 l 20 : l2.0 pressure relief 0 6.3 + C 0 10 0 d0.5 features endurance : 105 c 1000 h to 2000 h rohs directive compliant radial lead type series: nhg type: a specifi cations category temp. range C55 c to +105 c C25 c to +105 c rated w.v. range 6.3 v.dc to 100 v.dc 160 v.dc to 450 v.dc nominal cap. range 2.2 f to 22000 f 1 f to 330 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (which is greater) i < 0.06 cv +10 (a) after 2 minutes tan d please see the attached standard products list endurance after following life test with dc voltage and +105 c2 c ripple current value applied (the sum of dc and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 c, the capacitors shall meet the limits speci? ed below. duration : 6.3 v.dc to 100 v.dc : ( 0 5 to 0 8)=1000 hours, ( 0 10 to 0 18)=2000 hours 160 v.dc to 450 v.dc : 2000 hours capacitance change 20 % of initial measured value tan d < 200 % of initial speci? ed value dc leakage current < initial speci? ed value shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) di men sions in mm (not to scale) w.v.(v.dc) cap. (f) frequency (hz) 60 120 1 k 10 k 100 k 6.3 to 100 2.2 to 33 0.75 1.00 1.55 1.80 2.00 47 to 470 0.80 1.00 1.35 1.50 1.50 1000 to 22000 0.85 1.00 1.10 1.15 1.15 160 to 450 1 to 330 0.80 1.00 1.35 1.50 1.50 frequency correction factor for ripple current body dia. 0 d5 6.3 8 1012.516 18 lead dia. 0 d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 lead space f 2.0 2.5 3.5 5.0 5.0 7.5 7.5 (unit : mm) 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ nhg C eee-100 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+105 c) tan d (120 hz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (f) (mm) (mm) (ma r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 6.3 220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 eca0jhg221( ) 200 2000 470 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 eca0jhg471( ) 200 2000 1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 eca0jhg102( ) 200 1000 2200 10 16 710 0.30 2000 0.6 5.0 5.0 eca0jhg222( ) 200 500 3300 10 20 840 0.32 2000 0.6 5.0 5.0 eca0jhg332( ) 200 500 4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 eca0jhg472( ) 200 500 6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 eca0jhg682( ) 200 500 10000 16 25 1650 0.46 2000 0.8 7.5 7.5 eca0jhg103( ) 100 250 15000 16 31.5 2010 0.56 2000 0.8 7.5 eca0jhg153 100 22000 18 35.5 2350 0.70 2000 0.8 7.5 eca0jhg223 50 10 330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 eca1ahg331( ) 200 2000 470 8 11.5 250 0.24 1000 0.6 3.5 5.0 eca1ahg471( ) 200 1000 1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 eca1ahg102( ) 200 500 2200 10 20 760 0.26 2000 0.6 5.0 5.0 eca1ahg222( ) 200 500 3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 eca1ahg332( ) 200 500 4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 eca1ahg472( ) 200 500 6800 16 25 1570 0.34 2000 0.8 7.5 7.5 eca1ahg682( ) 100 250 10000 16 31.5 1890 0.42 2000 0.8 7.5 eca1ahg103 100 15000 18 35.5 2180 0.52 2000 0.8 7.5 eca1ahg153 50 16 10 0 5 11 110 0. 2 0 10 0 0 0.5 2.0 5.0 2.5 eca1chg101( ) 200 2000 220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 eca1chg221( ) 200 2000 330 8 11.5 260 0.20 1000 0.6 3.5 5.0 eca1chg331( ) 200 1000 470 8 11.5 310 0.20 1000 0.6 3.5 5.0 eca1chg471( ) 200 1000 1000 10 16 560 0.20 2000 0.6 5.0 5.0 eca1chg102( ) 200 500 2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 eca1chg222( ) 200 500 3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 eca1chg332( ) 200 500 4700 16 25 1480 0.26 2000 0.8 7.5 7.5 eca1chg472( ) 100 250 6800 16 31.5 1780 0.30 2000 0.8 7.5 eca1chg682 100 10000 18 35.5 2060 0.38 2000 0.8 7.5 eca1chg103 50 25 47 5 11 91 0.16 1000 0.5 2.0 5.0 2.5 eca1ehg470( ) 200 2000 100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 eca1ehg101( ) 200 2000 220 8 11.5 230 0.16 1000 0.6 3.5 5.0 eca1ehg221( ) 200 1000 330 8 11.5 310 0.16 1000 0.6 3.5 5.0 eca1ehg331( ) 200 1000 470 10 12.5 380 0.16 2000 0.6 5.0 5.0 eca1ehg471( ) 200 500 1000 10 20 680 0.16 2000 0.6 5.0 5.0 eca1ehg102( ) 200 500 2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 eca1ehg222( ) 200 500 3300 16 25 1400 0.20 2000 0.8 7.5 7.5 eca1ehg332( ) 100 250 4700 16 31.5 1750 0.22 2000 0.8 7.5 eca1ehg472 100 6800 18 35.5 2040 0.26 2000 0.8 7.5 eca1ehg682 50 35 47 5 11 90 0.14 1000 0.5 2.0 5.0 2.5 eca1vhg470( ) 200 2000 100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 eca1vhg101( ) 200 2000 220 8 11.5 270 0.14 1000 0.6 3.5 5.0 eca1vhg221( ) 200 1000 330 10 12.5 350 0.14 2000 0.6 5.0 5.0 eca1vhg331( ) 200 500 470 10 16 460 0.14 2000 0.6 5.0 5.0 eca1vhg471( ) 200 500 1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 eca1vhg102( ) 200 500 2200 16 25 1260 0.16 2000 0.8 7.5 7.5 eca1vhg222( ) 100 250 3300 16 31.5 1610 0.18 2000 0.8 7.5 eca1vhg332 100 4700 18 35.5 1910 0.20 2000 0.8 7.5 eca1vhg472 50 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch ? b=5 mm, 7.5 mm, i=2.5 mm. please refer to the page of taping dimensions. 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ nhg C eee-101 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+105 c) tan d (120 hz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (f) (mm) (mm) (ma r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 50 0.1 5 11 1.1 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg0r1( ) ??? 200 2000 0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr22( ) ??? 200 2000 0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr33( ) ??? 200 2000 0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 eca1hhgr47( ) ??? 200 2000 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg010( ) ??? 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg2r2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg3r3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg4r7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 eca1hhg330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 eca1hhg470( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 eca1hhg101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 eca1hhg221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 eca1hhg331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 eca1hhg471( ) 200 500 1000 12.5 25 950 0.12 2000 0.6 5.0 5.0 eca1hhg102( ) 200 500 2200 16 31.5 1470 0.14 2000 0.8 7.5 eca1hhg222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 eca1hhg332 50 63 10 5 11 46 0.10 1000 0.5 2.0 5.0 2.5 eca1jhg100( ) 200 2000 22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 eca1jhg220( ) 200 2000 33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 eca1jhg330( ) 200 2000 47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 eca1jhg470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 eca1jhg101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 eca1jhg221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 eca1jhg331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 eca1jhg471( ) 200 500 1000 16 25 930 0.10 2000 0.8 7.5 7.5 eca1jhg102( ) 100 250 2200 18 35.5 1610 0.12 2000 0.8 7.5 eca1jhg222 50 100 0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 eca2ahgr47( ) ??? 200 2000 1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg010( ) ??? 200 2000 2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg2r2( ) 200 2000 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg3r3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 eca2ahg4r7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 eca2ahg100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 eca2ahg220( ) 200 2000 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch ? b=5 mm, 7.5 mm, i=2.5 mm. please refer to the page of taping dimensions. ??? please kindly accept last shipment : 31/mar/2015 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ nhg C eee-102 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+105 c) tan d (120 hz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (f) (mm) (mm) (ma r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 100 33 8 11.5 130 0.08 1000 0.6 3.5 5.0 eca2ahg330( ) 200 1000 47 10 12.5 165 0.08 2000 0.6 5.0 5.0 eca2ahg470( ) 200 500 100 10 20 265 0.08 2000 0.6 5.0 5.0 eca2ahg101( ) 200 500 220 12.5 25 440 0.08 2000 0.6 5.0 5.0 eca2ahg221( ) 200 500 330 16 25 540 0.08 2000 0.8 7.5 7.5 eca2ahg331( ) 100 250 470 16 25 715 0.08 2000 0.8 7.5 7.5 eca2ahg471( ) 100 250 1000 18 35.5 985 0.08 2000 0.8 7.5 eca2ahg102 50 160 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2chg010( ) 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 eca2chg2r2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 eca2chg3r3( ) 200 2000 4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 eca2chg4r7( ) 200 2000 10 10 12.5 70 0.15 2000 0.6 5.0 5.0 eca2chg100( ) 200 500 22 10 20 130 0.15 2000 0.6 5.0 5.0 eca2chg220( ) 200 500 33 10 20 180 0.15 2000 0.6 5.0 5.0 eca2chg330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 eca2chg470( ) 200 500 100 16 25 335 0.15 2000 0.8 7.5 7.5 eca2chg101( ) 100 250 220 16 31.5 540 0.15 2000 0.8 7.5 eca2chg221 100 330 18 31.5 705 0.15 2000 0.8 7.5 eca2chg331 50 200 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg010( ) 200 2000 2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg2r2( ) 200 2000 3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 eca2dhg3r3( ) 200 2000 4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 eca2dhg4r7( ) 200 1000 10 10 16 80 0.15 2000 0.6 5.0 5.0 eca2dhg100( ) 200 500 22 10 20 140 0.15 2000 0.6 5.0 5.0 eca2dhg220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 eca2dhg330( ) 200 500 47 12.5 20 220 0.15 2000 0.6 5.0 5.0 eca2dhg470( ) 200 500 100 16 25 335 0.15 2000 0.8 7.5 7.5 2.5 eca2dhg101( ) 100 250 220 18 31.5 575 0.15 2000 0.8 7.5 eca2dhg221 50 250 1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 eca2ehg010( ) 200 2000 2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 eca2ehg2r2( ) 200 2000 3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 eca2ehg3r3 200 1000 4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 eca2ehg4r7( ) 200 1000 10 10 16 88 0.15 2000 0.6 5.0 5.0 eca2ehg100( ) 200 500 22 12.5 20 155 0.15 2000 0.6 5.0 5.0 eca2ehg220( ) 200 500 33 12.5 20 190 0.15 2000 0.6 5.0 5.0 eca2ehg330( ) 200 500 47 12.5 25 230 0.15 2000 0.6 5.0 5.0 eca2ehg470( ) 200 500 100 16 31.5 365 0.15 2000 0.8 7.5 eca2ehg101 100 350 1 6.3 11.2 18 0.20 2000 0.5 2.5 5.0 2.5 eca2vhg010( ) 200 2000 2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 eca2vhg2r2( ) 200 1000 3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 eca2vhg3r3( ) 200 500 4.7 10 16 50 0.20 2000 0.6 5.0 5.0 eca2vhg4r7( ) 200 500 10 10 20 82 0.20 2000 0.6 5.0 5.0 eca2vhg100( ) 200 500 22 12.5 20 130 0.20 2000 0.6 5.0 5.0 eca2vhg220( ) 200 500 33 16 25 195 0.20 2000 0.8 7.5 7.5 eca2vhg330( ) 100 250 47 16 25 230 0.20 2000 0.8 7.5 7.5 eca2vhg470( ) 100 250 100 18 31.5 375 0.20 2000 0.8 7.5 eca2vhg101 50 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch ? b=5 mm, 7.5 mm, i=2.5 mm. please refer to the page of taping dimensions. 01 oct. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ nhg C eee-103 C standard prod ucts w.v. cap. (20 %) case size speci? cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+105 c) tan d (120 hz) (+20 c) endur- ance lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (f) (mm) (mm) (ma r.m.s.) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs) 400 1 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 2.5 eca2ghg010( ) 200 2000 2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 eca2ghg2r2( ) 200 1000 3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 eca2ghg3r3( ) 200 500 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 eca2ghg4r7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 eca2ghg100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 eca2ghg220( ) 200 500 33 16 25 195 0.24 2000 0.8 7.5 7.5 eca2ghg330( ) 100 250 47 16 31.5 250 0.24 2000 0.8 7.5 eca2ghg470 100 450 1 8 11.5 18 0.24 2000 0.6 3.5 5.0 eca2whg010( ) 200 1000 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 eca2whg2r2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 eca2whg3r3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 eca2whg4r7( ) 200 500 10 12.5 20 75 0.24 2000 0.6 5.0 5.0 eca2whg100( ) 200 500 22 16 25 115 0.24 2000 0.8 7.5 7.5 eca2whg220( ) 100 250 33 16 31.5 155 0.24 2000 0.8 7.5 eca2whg330 100 when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch ? b=5 mm, 7.5 mm, i=2.5 mm. please refer to the page of taping dimensions. 01 oct. 2013
|
